home *** CD-ROM | disk | FTP | other *** search
/ Magnum One / Magnum One (Mid-American Digital) (Disc Manufacturing).iso / d2 / pasbr200.arc / PASBRDOC.TXT < prev    next >
Text File  |  1990-05-22  |  56KB  |  1,310 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.                           POINT & SHOOT BACKUP/RESTORE 2.0
  7.  
  8.  
  9.                                Copyright (C) 1987-90
  10.                                 All Rights Reserved
  11.  
  12.                          Applied Micro Systems Technology
  13.                                   Kurt H. Diesch
  14.                    Member, Association of Shareware Professionals
  15.  
  16.                              Revised:   April 20, 1990
  17.  
  18.  
  19.  
  20.           Point & Shoot Backup/Restore is a hard disk backup and restoration
  21.           program designed for IBM Personal Computers and  100% compatibles. 
  22.           Applied  Micro Systems Technology reserves the  COPYRIGHT to  this 
  23.           program  and  all   related  materials.  The  user  is  granted  a 
  24.           non-exclusive   license to  use  the  program  and  is  encouraged
  25.           to  pay for the program if it is found to be useful.   Payment  of
  26.           the    $35  registration  fee  will  entitle  the  user  to   full 
  27.           registration   including printed documentation and  user  support. 
  28.           Government  and business entities may not use the program  without
  29.           paying the full registration fee.     Please register your program
  30.           with the form included at the end of the documentation or by using
  31.           the  [Alt-P]  command within the program to print  a  registration
  32.           form.  REMEMBER: Shareware is not free! Send payments to:
  33.  
  34.  
  35.                           Applied Micro Systems Technology
  36.                               P.O. Box 1596, Welch Ave. 
  37.                                  Ames, Iowa  50010
  38.  
  39.  
  40.           The  user is also granted permission to make unlimited  copies  of
  41.           the  program and to distribute those copies as long as no  fee  is
  42.           charged  for the program.   A duplication charge not to exceed  $5
  43.           may be collected.
  44.  
  45.           Applied  Micro  Systems  Technology  specifically  disclaims   all
  46.           warranties,  expressed or implied,  including but not limited  to,
  47.           implied   warranties  of  merchantability  and  fitness  for   any
  48.           particular  purpose.   In  no event shall  Applied  Micro  Systems
  49.           Technology  be  liable  for  any  loss  of  profit  or  any  other
  50.           commercial   damage,   including  but  not  limited  to   special,
  51.           incidental, consequential or other damages.
  52.  
  53.  
  54.  
  55.                   MEMBER - ASSOCIATION OF SHAREWARE PROFESSIONALS
  56.  
  57.  
  58.           The author of this program is a member of ASP and has agreed to
  59.           comply with its standards:
  60.  
  61.           Programming standards-
  62.             -  The program meets ASP's definition of Shareware.
  63.             -  The program has been thoroughly tested by the author and
  64.                should not be harmful to other files or hardware if used
  65.                properly (although ASP cannot warrant this; therefore, the
  66.                user should take normal precautions in trying new software).
  67.  
  68.           Documentation standards-
  69.             -  Sufficient documentation is provided to allow the average
  70.                user to try all major functions of the program.
  71.             -  The program author has explained the Shareware concept in a 
  72.                professional and positive manner.
  73.  
  74.           Support standards-
  75.             -  The program author will respond as described in the
  76.                documentation to people who send registration payments.  At a
  77.                minimum, the author will send an acknowledgement of payment.
  78.             -  The author will respond to written bug reports from
  79.                registered users when the user provides a self-addressed,
  80.                stamped envelope (some authors will respond by phone, but
  81.                this is not an ASP requirement).
  82.             -  Incompatibilities with other software or hardware, major or
  83.                unusual program limitations, or known problems are noted in
  84.                the documentation that comes with the shareware version of
  85.                the program.
  86.  
  87.           General-
  88.             -  The author keeps his/her membership in ASP current.
  89.             -  The author recognizes that any user may appeal to ASP for any
  90.                unresolved dispute that arises.
  91.  
  92.  
  93.           If you feel that the author has not complied with these  standards
  94.           in some manner or if you register the program with the author  and
  95.           subsequently  have  any disputes with the author which  cannot  be
  96.           resolved, please write the ASP at:
  97.  
  98.  
  99.                          Association of Shareware Professionals
  100.                                     PO Box 5786
  101.                                 Bellevue, WA  98006
  102.  
  103.  
  104.           While ASP cannot warrant programs nor the actions of members,  ASP
  105.           will  do  what  it  can  to assure  that  all  authors  who  claim
  106.           membership  comply with ASP standards.   These standards  are  the
  107.           assurance  of  quality  and support that you  will  get  when  you
  108.           register Shareware produced by ASP members.
  109.  
  110.  
  111.  
  112.                                     SHAREWARE
  113.  
  114.  
  115.           To promote better understanding of the shareware concept,  ASP has
  116.           developed the following definition of Shareware:
  117.  
  118.                Shareware  distribution  gives  users a  chance  to  try
  119.                software  before  buying it.   If you  try  a  Shareware
  120.                program  and  continue using it,  you  are  expected  to
  121.                register.  Individual programs differ on details -- some
  122.                request  registration  while  others  require  it,  some
  123.                specify a maximum trial period.  With registration,  you
  124.                get anything from the simple right to continue using the
  125.                software to an updated program with printed manual.
  126.  
  127.                Copyright  laws apply to both Shareware  and  commercial
  128.                software,  and the copyright holder retains all  rights,
  129.                with   a  few  specific  exceptions  as  stated   below.
  130.                Shareware  authors  are accomplished  programmers,  just
  131.                like  commercial  authors,   and  the  programs  are  of
  132.                comparable  quality.  (In  both cases,  there  are  good
  133.                programs  and bad ones!)  The main difference is in  the
  134.                method of distribution.   The author specifically grants
  135.                the right to copy and distribute the software, either to
  136.                all  and  sundry or to a specific group.   For  example,
  137.                some   authors  require  written  permission  before   a
  138.                commercial disk vendor may copy their Shareware.
  139.  
  140.                SO,  Shareware is a distribution method,  not a type  of
  141.                software. You should find software that suits your needs
  142.                and  pocketbook,  whether it's commercial or  Shareware. 
  143.                The  Shareware system makes fitting your  needs  easier,
  144.                because  you  can try before you buy.  And  because  the
  145.                overhead is low, prices are low also.  Shareware has the
  146.                ultimate  money-back guarantee -- if you don't  use  the
  147.                product, you don't pay for it.
  148.  
  149.  
  150.  
  151.                                 TABLE OF CONTENTS
  152.                                 -----------------
  153.  
  154.           QUICK START GUIDE   ...............................    1
  155.  
  156.           INTRODUCTION   ....................................    2
  157.  
  158.           INSTALLATION   ....................................    4
  159.  
  160.           GENERAL OVERVIEW   ................................    5
  161.  
  162.           MAIN MENU COMMANDS   ..............................    7
  163.              Backup   .......................................    7
  164.              Compression   ..................................    7
  165.              Restore   ......................................    7
  166.              Setup   ........................................    7
  167.              Quit   .........................................    7
  168.  
  169.           BACKUP COMMANDS   .................................    8
  170.              Backup   ......................................     8
  171.              Calculate   ....................................    9
  172.              Delete   .......................................   10
  173.              Format   .......................................   10
  174.              Update   .......................................   11
  175.  
  176.           COMPRESSION COMMANDS   ............................   13
  177.  
  178.           RESTORE COMMANDS   ................................   14
  179.              Restore   ......................................   14
  180.              Update   .......................................   16
  181.  
  182.           SETUP   ...........................................   17
  183.  
  184.           EXAMPLES & BACKUP STRATEGY   ......................   18
  185.  
  186.           REGISTRATION FORM   ...............................   19
  187.  
  188.  
  189.  
  190.  
  191.                                 QUICK START GUIDE
  192.                                 -----------------
  193.  
  194.  
  195.           IF YOU ARE NOT AN EXPERIENCED USER, YOU WILL DO WELL TO SKIP  THIS
  196.           SECTION AND READ THE DOCUMENTATION BEFORE USING THE PROGRAM!
  197.  
  198.  
  199.           If  you are an experienced computer user,  you may use this  quick
  200.           start  guide to install and run the Point &  Shoot  Backup/Restore
  201.           program.    Most  of  the  commands  found  in  the  program   are
  202.           self-explanatory,  and  you can refer to the  documentation  later
  203.           when you have questions.
  204.  
  205.           To install Point & Shoot Backup/Restore,  copy the PASBR.EXE  file
  206.           to  a subdirectory of your choice on your hard disk.   Modify  the
  207.           PATH  command in your AUTOEXEC file appropriately.   When you  run
  208.           the  program for the first time, use the SETUP command  to  define
  209.           your disk drives.
  210.  
  211.           The  only  tricky  part  of the program is  found  in  the  BACKUP
  212.           section.   When  you modify the backup configurations,  place  the
  213.           cursor on any one of the FILE SEARCH lines and use the [F7] key to
  214.           select a subdirectory for backup.   If you set the INCLUDE  TRAILS
  215.           option to "Y",  all child directories following the BACKUP  SOURCE
  216.           PATH you selected will be included in the backup.  All 10 lines of
  217.           each  backup configuration may define different directories,  file
  218.           specifications  and  drives,  giving you a lot of  flexibility  in
  219.           defining  your  backup.   You may run backups  directly  from  the
  220.           command  line  by  entering  PASBR  x   where  x  is  the   backup
  221.           configuration number you wish to execute.
  222.  
  223.           Please  note  that the fastest form of backup is  on  1.2MB  5.25"
  224.           disks  or 1.44MB 3.5"  disks,  without formatting or  compression. 
  225.           Speeds  for these backups will approach 1 MB of data  per  minute. 
  226.           Other   disk  sizes  backup  approximately  1/2  MB  per   minute. 
  227.           Formatting  is  automatically performed if the disk  used  is  not
  228.           formatted,  so  you can potentially leave the  FORCE  DISK  FORMAT
  229.           option off.   Compression adds significantly to the time  required
  230.           for a backup, but will compress files by approximately 50%.
  231.  
  232.           An  index of all files backed up is kept on the last backup  disk. 
  233.           If you elect to restore selected files,  a file list and directory
  234.           tree  will  allow  you to quickly select the  files  you  wish  to
  235.           restore.   Files  may  be optionally  restored  to  drives  and/or
  236.           directories  other  than where they originally existed.   You  can
  237.           also manually create directories during the restoration process.
  238.  
  239.           The  COMPRESSION  command  allows you to  compress  or  decompress
  240.           individual files.  This is also aided by a file list and directory
  241.           tree.   The  compressed  files are a  special  AMST  format  which
  242.           defaults to an ".APK" extension.  Currently, a compressed file may
  243.           only contain a single file.   Future versions of the program  will
  244.           provide  more  options in this area,  similar to  other  available
  245.           compression programs.
  246.  
  247.                                       - 1 -
  248.  
  249.  
  250.                                    INTRODUCTION
  251.                                    ------------
  252.  
  253.  
  254.           Point & Shoot Backup/Restore is a companion program for the  Point
  255.           &  Shoot Hard Disk Manager but can also be used as  a  stand-alone 
  256.           product.   Point  & Shoot Backup/Restore is  designed  to  provide
  257.           fast,  easy backup of your hard disk data to floppy  disks.   User
  258.           involvement is minimized in the backup and/or restore process.  If
  259.           you own a hard disk, Point & Shoot Backup/Restore is a necessity.
  260.  
  261.           Point  &  Shoot Backup/Restore currently  supports  the  following
  262.           functions:
  263.  
  264.                o  Up to 10 user-defined backup configurations, each of which
  265.                   may contain a list of up to 10 subdirectory backup 
  266.                   sources.  Each backup source directory may include 
  267.                   trailing directories for complete flexibility in backup 
  268.                   definitions.  Backups may be run from the command line.
  269.  
  270.                o  Each backup definition allows selection of matching file 
  271.                   specs, modified files only, optional file compression, and
  272.                   optional disk formatting during the backup process.  A
  273.                   graphic directory tree display assists in the selection of
  274.                   backup source directories.
  275.  
  276.                o  Files remain intact (DOS readable) on backup disks (except
  277.                   when disk boundaries must be crossed or when the files are
  278.                   compressed). Required number of backup disks and estimated
  279.                   backup time are automatically calculated.
  280.  
  281.                o  Restoration options include source drive, restoration to 
  282.                   other than the original path, prompts for duplicate or 
  283.                   modified files, and selective file restoration.  Again, a 
  284.                   graphic directory tree assists in selection of restoration
  285.                   paths and a combination file list/directory tree allow
  286.                   easy selection of specific files for restoration.
  287.  
  288.                o  Self-contained compression/decompression utility uses a
  289.                   file list and directory tree to select files to compress
  290.                   and decompress.  This feature will be expanded in the
  291.                   future to allow multi-file options and other features
  292.                   found in similar programs.  NOTE:  We are not attempting
  293.                   to provide yet another compression program to cloud the
  294.                   compression war issue.  Rather, we are providing an option
  295.                   in this software to work with compressed files created
  296.                   during the backup process using the optional file
  297.                   compression.  We fully support and encourage the use
  298.                   of industry standard compression programs.
  299.  
  300.                o  Configuration options include colors, an hourly chime, and
  301.                   drive designations.
  302.  
  303.                o  Supports 360K and 1.2M 5-1/4", 720K and 1.44M 3-1/2"
  304.                   floppy disks.
  305.  
  306.                                       - 2 -
  307.  
  308.  
  309.           Point  & Shoot Backup/Restore requires the following hardware  and
  310.           software to operate correctly:
  311.  
  312.                o  IBM or 100% compatible computer with 320K minimum memory.
  313.  
  314.                o  A hard disk and 1 floppy disk
  315.  
  316.                o  MS-DOS version 2.0 or greater
  317.  
  318.                o  Color/graphics, monochrome, EGA or VGA display adaptor
  319.  
  320.  
  321.  
  322.           I am more than willing to enhance the program to meet the needs of
  323.           you,  the user.   As you are well aware,  part of the  reward  for
  324.           writing well-received software is monetary.  If you would like  to
  325.           continue to use Point & Shoot Backup/Restore,  a $35 payment  will
  326.           register your copy of the program.   The registration fee entitles
  327.           you  to printed documentation and user support.   Please  use  the
  328.           registration  form  found in this documentation file  to  register
  329.           your copy of the program.
  330.  
  331.  
  332.  
  333.  
  334.           Special  thanks  go  to  Mike  Davenport  for  his  assistance  in
  335.           developing  the  compression routines utilized  in  this  program. 
  336.           Thanks  also go to John Newlin for his help in improving the  disk
  337.           formatting routines.
  338.  
  339.  
  340.  
  341.  
  342.  
  343.  
  344.  
  345.  
  346.  
  347.  
  348.  
  349.  
  350.  
  351.  
  352.  
  353.  
  354.  
  355.  
  356.  
  357.  
  358.  
  359.  
  360.  
  361.  
  362.  
  363.  
  364.  
  365.                                       - 3 -
  366.  
  367.  
  368.                                    INSTALLATION
  369.                                    ------------
  370.  
  371.           Following  are  installation instructions.  If  any  problems  are
  372.           encountered,  first  check  your  computer.   If  you  still  have
  373.           problems,   enlist  the  aid  of  someone  who  is  perhaps   more
  374.           knowledgeable with computers than yourself.   A third  alternative
  375.           is to contact AMST.
  376.  
  377.                1)  Place the Point & Shoot Backup/Restore program disk in 
  378.                    a floppy disk drive.
  379.  
  380.                2)  Log onto the floppy disk drive containing the backup
  381.                    program and type the following command:
  382.  
  383.                               INSTALL source: target:
  384.  
  385.                    where:
  386.                               source   is the floppy drive letter you are
  387.                                        installing from
  388.                               target   is the hard drive letter you are
  389.                                        installing to
  390.  
  391.                3)  The Point & Shoot Backup/Restore program may now be run
  392.                    from the Point & Shoot Hard Disk Manager (if you own it)
  393.                    or directly from DOS.  If you are NOT running the backup
  394.                    program from the Point & Shoot Hard Disk Manager, you
  395.                    must add "\P&S" to the PATH command in your AUTOEXEC.BAT
  396.                    file.  If you don't have a PATH command in your
  397.                    AUTOEXEC.BAT file, then make the following the first
  398.                    line in your AUTOEXEC.BAT file:
  399.  
  400.                                PATH \P&S
  401.  
  402.                4)  To run the program, change to the \P&S directory and type
  403.                    PASBR.
  404.  
  405.  
  406.           To print the documentation, change to the \P&S directory and type
  407.           the following command from the DOS prompt:
  408.  
  409.                               COPY  PASBRDOC.TXT  PRN:
  410.  
  411.           Another option to print the documentation is to use the File Print
  412.           command in the Point & Shoot Hard Disk Manager file commands.
  413.  
  414.           Following  is a complete list of the Point & Shoot  Backup/Restore
  415.           program and data files contained on the distribution disk.
  416.  
  417.                CHANGES.TXT    Revisions of Point & Shoot Backup/Restore
  418.                PASBR.EXE      The Point & Shoot Backup/Restore program
  419.                PASBRDOC.TXT   Point & Shoot Backup/Restore documentation
  420.                FILES.TXT      Description of the files on the disk
  421.                INSTALL.BAT    Point & Shoot Backup/Restore installation file
  422.                READ.ME        Last minute changes to the program
  423.  
  424.                                       - 4 -
  425.  
  426.  
  427.                                  GENERAL OVERVIEW
  428.                                  ----------------
  429.  
  430.           Point  & Shoot Backup/Restore may be executed in three  ways.   If
  431.           you  own  the  Point  & Shoot Hard Disk  Manager,  Point  &  Shoot
  432.           Backup/Restore may be executed with the BACKUP command from  Point
  433.           & Shoot's main menu (PASBR.EXE must reside in the P&S directory or
  434.           a  directory in the PATH command of your AUTOEXEC.BAT).   You  may
  435.           also  install  the Backup/Restore program as a  user-defined  menu
  436.           item  in the Point & Shoot Hard Disk Manager.   The Point &  Shoot
  437.           Backup/Restore  program  may  also be executed  as  a  stand-alone
  438.           program by entering PASBR from the DOS command line.
  439.  
  440.           To  automatically  run  a backup configuration,  enter  the  PASBR
  441.           command followed by the desired backup configuration number:
  442.  
  443.                PASBR  x    (where x is the backup configuration number)
  444.  
  445.           If you do not provide the optional parameter, the program operates
  446.           by user interaction.   If the parameter is specified,  the program
  447.           will  immediately go into backup mode and will terminate when  the
  448.           backup has finished.
  449.  
  450.           When Point & Shoot Backup/Restore is run,  the main program screen
  451.           will  appear.   The top line of the screen displays the  name  and
  452.           version  of the program,  a copyright notice and the current  date
  453.           and  time.   The center portion of the screen displays a  detailed
  454.           copyright notice and registration information.  The bottom section
  455.           of the screen displays the program menus with an explanatory  line
  456.           on  the bottom.   If your copy of the program is  unregistered,  a
  457.           flashing  message  will  request that you  register  the  program. 
  458.           Registered copies of the program do not have this message.
  459.  
  460.           Most  of  the program functions are executed through the  list  of
  461.           commands   shown   in  the  bottom  area  of  the   screen.    The
  462.           [left-arrow],  [right-arrow],  [Space] or  [BackSpace] keys may be
  463.           used to highlight the desired command.   The one line  description
  464.           of  the command shown on the last line of the screen  will  change
  465.           appropriately.   To execute any of the functions,  press the first
  466.           letter of the command.   The command corresponding to the selected
  467.           letter will be immediately executed.   Alternately,  highlight the
  468.           desired command and press the [Enter] key.
  469.  
  470.           Some commands will invoke another command list.   The name of  the
  471.           current  command  list  is always shown on the left  side  of  the
  472.           command list.  You may move to a previous command list by pressing
  473.           the  [Esc] key.   Each command list also has a QUIT command  which
  474.           will move to the previous command list. In general,  the [Esc] key
  475.           serves to abort any operation or selection.
  476.  
  477.           To quit the program and return to the operating system (or back to
  478.           the Point & Shoot Hard Disk Manager),  press [Esc] or select  QUIT
  479.           from the Main Menu command list.
  480.  
  481.  
  482.  
  483.                                       - 5 -
  484.  
  485.  
  486.  
  487.           At  many points in the program, you will be entering  or  changing
  488.           information  on the screen.   The procedure is generally the  same
  489.           and  is outlined here.   Differences that occur in this  procedure
  490.           are   covered   in  the  appropriate  detail  sections   of   this
  491.           documentation.
  492.  
  493.           When entering or updating data screens a flashing "*"  will appear
  494.           on  the  data screen to indicate where your information is  to  be
  495.           entered.   A cursor will also show the current position  within  a
  496.           data field.   (Data fields are the hilighted areas of the screen). 
  497.           Some  or all of the following commands will be available for  data
  498.           entry:
  499.  
  500.                [left/right arrow]:  Moves the cursor within the current
  501.                                     field.  If the cursor is at the first
  502.                                     position within a field, then the
  503.                                     previous field will be selected.  If the
  504.                                     cursor is at the last position within a
  505.                                     field, then the next field will be 
  506.                                     selected.
  507.  
  508.                [ctrl-left/right]:   Moves the cursor to the first position
  509.                                     or last character of the field.
  510.  
  511.                [up/down arrow]:     Selects the previous or next data field
  512.                                     for editing.
  513.  
  514.                [Enter/return]:      Same as right or down arrow for next 
  515.                                     field.
  516.  
  517.                [F8]:                Blanks the current data field.
  518.  
  519.                [Esc]:               Aborts changes made to the data screen
  520.                                     and completes enter/update action.
  521.  
  522.                [F10]:               Accepts changes made to the data screen
  523.                                     and completes enter/update action.
  524.  
  525.  
  526.  
  527.  
  528.  
  529.  
  530.  
  531.  
  532.  
  533.  
  534.  
  535.  
  536.  
  537.  
  538.  
  539.  
  540.  
  541.  
  542.                                       - 6 -
  543.  
  544.  
  545.                                MAIN MENU COMMANDS
  546.                                ------------------
  547.  
  548.           The  Main  Menu  is the center of  Point  &  Shoot  Backup/Restore
  549.           activity.   Some of the Main Menu commands move to another command
  550.           list, while others will immediately execute a command.   Following
  551.           is a description of the Main Menu commands.
  552.  
  553.  
  554.           BACKUP
  555.  
  556.           Moves  to the BACKUP menu from which you may perform a  backup  of
  557.           hard disk data to floppy disks.
  558.  
  559.  
  560.           COMPRESSION
  561.  
  562.           Moves to the COMPRESSION screen from which you may compress or
  563.           decompress files.
  564.  
  565.  
  566.           RESTORE
  567.  
  568.           Moves to the RESTORE menu from which you may perform a restoration
  569.           of previous backup disks to your hard disk.
  570.  
  571.  
  572.           SETUP
  573.  
  574.           Moves to the program setup data screen described later.
  575.  
  576.  
  577.           QUIT
  578.  
  579.           Returns to DOS.
  580.  
  581.  
  582.  
  583.  
  584.  
  585.  
  586.  
  587.  
  588.  
  589.  
  590.  
  591.  
  592.  
  593.  
  594.  
  595.  
  596.  
  597.  
  598.  
  599.  
  600.  
  601.                                       - 7 -
  602.  
  603.  
  604.                                  BACKUP COMMANDS
  605.                                  ---------------
  606.  
  607.           The  Backup  Menu consists of a set of commands that  perform  the
  608.           following functions:
  609.  
  610.                o  Backup your hard disk using up to 10 different 
  611.                   user-defined backup configurations
  612.  
  613.                o  Calculate the number of disks required for a selected 
  614.                   backup configuration
  615.  
  616.                o  Format floppy disks to be used for backup
  617.  
  618.           Point  & Shoot Backup/Restore performs backups on a file  by  file
  619.           basis with some files crossing disk boundaries.   Extensive  error
  620.           checking is included to provide a high level of backup  integrity. 
  621.           Subdirectories  may be selectively backed up and previous  backups
  622.           may be optionally restored to different subdirectories.   For your
  623.           protection,  Point  & Shoot Backup/Restore will not  back  up  the
  624.           hidden system files found in the root directory of your hard disk.
  625.  
  626.  
  627.           BACKUP
  628.  
  629.           The  BACKUP  command starts the backup process  according  to  the
  630.           displayed  current backup configuration.  See the  UPDATE  command
  631.           for details concerning changes to the backup configuration.
  632.  
  633.           When the BACKUP command begins, a backup status screen will appear
  634.           to show the progress of the backup including the following:
  635.  
  636.                Disk:         Current disk number
  637.  
  638.                Track:        Current track being written to
  639.  
  640.                Side:         Current side being written to
  641.  
  642.                File Name:    Path and name of the current backup file
  643.  
  644.                Comp Size:    Compressed size of file (in bytes)
  645.  
  646.                File Size:    Size of the current backup file (in bytes)
  647.  
  648.                # Copied:     Number of bytes of the current file that has
  649.                              been copied
  650.  
  651.                Comp Total:   Total number of compressed bytes backed up
  652.  
  653.                Curr Total:   Total number of bytes that have been backed up
  654.  
  655.                Total Bytes:  Total bytes of files defined for backup
  656.  
  657.                Bad Sec:      Total bad sectors encountered during backup
  658.  
  659.  
  660.                                       - 8 -
  661.  
  662.  
  663.  
  664.                # Files:      Total number of files that have been backup up
  665.  
  666.                Total:        Total number of files defined for backup
  667.  
  668.                Comp Ratio:   Average compression ratio
  669.  
  670.                Perc Done:    Percent of backup that has been completed
  671.  
  672.                Disk Space:   Remaining space on current backup target disk
  673.  
  674.  
  675.  
  676.           The  program will next instruct you to insert a disk in the  drive
  677.           indicated  by the backup configuration.  Insert a disk  and  press
  678.           [Enter]  to  proceed with the backup.  The backup process  may  be
  679.           aborted at this point by pressing [Esc].   Once the backup process
  680.           begins, it may only be stopped when the prompt for the next backup
  681.           disk appears.
  682.  
  683.           If the FORCE DISK FORMAT option is selected,  each new backup disk
  684.           will  be formatted before files are transferred.   See the  FORMAT
  685.           command  for details regarding the built-in format program.   With
  686.           or  without the format option, Point & Shoot  Backup/Restore  will
  687.           delete  all files from the target disk before transferring  files. 
  688.           The transfer of files to the backup disk will then begin.
  689.  
  690.           If  a  file  is to large to fit on a single disk,  Point  &  Shoot
  691.           Backup/Restore  will split the file between two or more disks  and
  692.           mark it as a split file for restoration purposes.  A situation may
  693.           occur  where the target backup disk contains a duplicate  filename
  694.           (when two or more hard disk subdirectories are placed on the  same
  695.           backup  disk).   In this case, Point & Shoot  Backup/Restore  will
  696.           automatically rename the file.   The original name is also  stored
  697.           so  that  the  correct file name will  be  maintained  during  the
  698.           restoration process.
  699.  
  700.           When  the  backup process is complete,  a message will  appear  to
  701.           indicate  completion.    Make  sure  that  all  backup  disks  are
  702.           correctly  numbered as the restoration process will  require  that
  703.           the disks are restored in sequential order.
  704.  
  705.  
  706.  
  707.           CALCULATE
  708.  
  709.           CALCULATE calculates the number of disks required for the  current
  710.           backup configuration.   The total number of files,  along with the
  711.           total number of bytes contained in those files, will be displayed. 
  712.           Note  that the correct disk type must be selected prior  to  using
  713.           the CALCULATE command.
  714.  
  715.  
  716.  
  717.  
  718.  
  719.                                       - 9 -
  720.  
  721.  
  722.  
  723.           Several  factors  are considered when calculating  the  number  of
  724.           disks required for a backup.  Point & Shoot Backup/Restore  stores
  725.           one special file called PASBRID.DAT on each backup disk, leaving a
  726.           total possible of 111 files for 360K and 720K disks, and 223 files
  727.           for 1.2M and 1.4M disks (a DOS limit).   In addition,  the special
  728.           file  will  reduce the available space (in bytes) of  each  backup
  729.           disk to the following:
  730.  
  731.                360K   342,016 bytes available
  732.  
  733.                1.2M   1,193,472 bytes available
  734.  
  735.                720K   709,632 bytes available
  736.  
  737.                1.4M   1,437,184 bytes available
  738.  
  739.  
  740.           It  should  be  noted  that every file copied  to  a  backup  disk
  741.           requires  a minimum of 1024 bytes for 360K and 720K disks and  512
  742.           bytes for 1.2MB and 1.44MB disks (this is a DOS requirement).  The
  743.           result is that more bytes must be available on a backup disk  than
  744.           the total of the individual file sizes.  CALCULATE takes this into
  745.           account when determining the required number of backup disks.   It
  746.           is  a  good  idea to have several extra disks  available  for  the
  747.           backup session in case a bad disk is encountered.
  748.  
  749.           CALCULATE  also assumes an average of 50% compression of files  if
  750.           the  compression option is selected in the  backup  configuration. 
  751.           Compression ratios may vary substantially,  depending on the  type
  752.           of file compressed.   EXE and COM files may only be compressed  by
  753.           20% to 30%, while text files, word processing files,  and database
  754.           files  may be compressed by 80% or more.   Just remember that  the
  755.           CALCULATE results may not be accurate if compression is used.
  756.  
  757.           The Point & Shoot Backup program also stores an index of all files
  758.           backed up on the last backup disk.  This file will be included in
  759.           the disk space and file count of the CALCULATE results.
  760.  
  761.  
  762.           DELETE
  763.  
  764.           DELETE clears the current backup configuration to default entries.
  765.  
  766.  
  767.           FORMAT
  768.  
  769.           The  FORMAT command is used like the DOS FORMAT command to  format
  770.           diskettes.   For  your protection,  the FORMAT command  will  only
  771.           operate  on  floppy  disk  drives.  When  you  select  the  FORMAT
  772.           command,  the  program  will  automatically  initiate  the  format
  773.           process  based on the current backup configuration drive and  disk
  774.           type.  If you have floppy disk drives with letters other than A or
  775.           B, see the SETUP command for instructions on using these drives.
  776.  
  777.  
  778.                                       - 10 -
  779.  
  780.  
  781.  
  782.           All  disks formatted with the FORMAT command will be  checked  for
  783.           bad  sectors.   Progress of the format operation will be shown  on
  784.           the screen.   When the format operation is complete, the total and
  785.           available bytes on the formatted disk will be shown.   If any  bad
  786.           sectors are found during the format operation, they will be marked
  787.           bad and excluded from further use.
  788.  
  789.  
  790.           UPDATE
  791.  
  792.           Update modifies the settings for the backup configurations.   Data
  793.           entry  is accomplished according to the commands described in  the
  794.           GENERAL OVERVIEW section of this documentation.
  795.  
  796.           In  addition to the standard editing commands,  the [F7]  function
  797.           key is used to select backup source paths.   When the cursor is on
  798.           any one of the FILE SEARCH or INCLUDE TRAILS lines,  the [F7]  key
  799.           invokes  the graphic directory tree display from which a path  may
  800.           be  selected  with the [up/down arrow],  [PgUp],  [PgDn],  [Home],
  801.           [End],  and [Enter] keys.   The [Esc] key will abort from the path
  802.           selection process without selecting a path.   Note that the cursor
  803.           will not go to the BACKUP SOURCE PATHS fields.  All path selection
  804.           is  done with the [F7] key.   If the directory tree does not  show
  805.           all of your hard disk drives, see the SETUP command to define your
  806.           drives.
  807.  
  808.           A  different backup configuration may be selected with the  [PgUp]
  809.           and   [PgDn]   keys.    The  [F10]  key  saves  all   the   backup
  810.           configurations, and [Esc] will cancel changes made.
  811.  
  812.           Following is a description of the data fields found on the backup
  813.           configuration screen:
  814.  
  815.                BACKUP CONFIGURATION DESCRIPTION:  A short description of the
  816.                     backup  configuration
  817.  
  818.                DESTINATION DRIVE:  The floppy disk drive to be used for the 
  819.                     backup
  820.  
  821.                BACKUP DRIVE TYPE:  The type of the destination drive
  822.  
  823.                FORCE DISK FORMAT:  Option to format backup disks during 
  824.                     the backup process.  If this option is set to "Y", all
  825.                     disks will be formatted.  If this option is set to "N",
  826.                     the program will detect and format unformatted disks.
  827.  
  828.                MODIFIED FILES ONLY:  Option to include only files modified 
  829.                     since the last backup
  830.  
  831.                USE FILE COMPRESSION:  Option to compress disk files during
  832.                     the backup process.  This option significantly slows the
  833.                     backup but will use fewer disks.
  834.  
  835.  
  836.  
  837.                                       - 11 -
  838.  
  839.  
  840.  
  841.           Ten   backup   source  paths  are  available   for   each   backup
  842.           configuration.   Each path line allows for entry of the  following
  843.           data:
  844.  
  845.                BACKUP SOURCE PATHS:  The directory from which files will be 
  846.                     backed up.  The cursor will not stop in this field, but
  847.                     the [F7] key is used when the cursor is in the FILE 
  848.                     SEARCH or INCLUDE TRAILS fields to invoke a directory
  849.                     tree for path selection.
  850.  
  851.                FILE SEARCH:  The filename search string to match.   Any
  852.                     string of characters may be entered including ? and *.
  853.                     Only those files matching the FILE SEARCH will be 
  854.                     selected for backup.  Refer to your DOS manual for
  855.                     a discussion of file search strings.
  856.  
  857.                INCLUDE TRAILS:  Option to include the child subdirectories
  858.                     following the BACKUP SOURCE PATH.  If enabled here and
  859.                     a subdirectory is duplicated in another specification 
  860.                     line, the duplicated subdirectory will be backed up 
  861.                     twice. 
  862.  
  863.  
  864.  
  865.  
  866.  
  867.  
  868.  
  869.  
  870.  
  871.  
  872.  
  873.  
  874.  
  875.  
  876.  
  877.  
  878.  
  879.  
  880.  
  881.  
  882.  
  883.  
  884.  
  885.  
  886.  
  887.  
  888.  
  889.  
  890.  
  891.  
  892.  
  893.  
  894.  
  895.  
  896.                                       - 12 -
  897.  
  898.  
  899.                                COMPRESSION COMMANDS
  900.                                --------------------
  901.  
  902.  
  903.           The  COMPRESSION command is used to compress or decompress  single
  904.           files using the same file format as the compression in BACKUP  and
  905.           the decompression in RESTORE.
  906.  
  907.           When  you select the COMPRESS command,  a file list and  directory
  908.           tree  will appear on the screen.  If the directory tree  does  not
  909.           show  all of your hard disks,  then refer to the SETUP command  to
  910.           define your drives.
  911.  
  912.           The [left arrow] and [right arrow] move between the file list  and
  913.           the directory tree.   A "*" will mark the current directory.   The
  914.           file  list will show the files in the current directory sorted  by
  915.           name.   Use the [up arrow], [down arrow], [Home] and [End] keys to
  916.           move  around the file list and directory tree.   The  [Enter]  key
  917.           selects the hilighted directory as the current directory.
  918.  
  919.           To  compress a file,  hilight the desired file and press  "C"  for
  920.           compress.  A prompt will appear asking for the name to use for the
  921.           compressed  file.   The default file name for compression  is  the
  922.           same  as  the  original file except the extension  is  changed  to
  923.           ".APK".   You may edit the target file name at this point.  If the
  924.           target  file already exists,  you will be asked if it is  okay  to
  925.           replace.   After the file is compressed, it will be shown  on  the
  926.           file list.  The original file is left intact.
  927.  
  928.           To decompress a file,  hilight the desired file and press "D"  for
  929.           decompress.  Only files that have been compressed with the Point &
  930.           Shoot Backup/Restore program may be decompressed in this  fashion. 
  931.           A  prompt  will  appear  asking  for  the  name  to  use  for  the
  932.           decompressed file.   You may enter any valid DOS filename at  this
  933.           point.  If the target file already exists, you will be asked if it
  934.           is okay to replace.
  935.  
  936.           More  options will be added to the COMPRESSION command  in  future
  937.           versions of the program.
  938.  
  939.  
  940.  
  941.  
  942.  
  943.  
  944.  
  945.  
  946.  
  947.  
  948.  
  949.  
  950.  
  951.  
  952.  
  953.  
  954.  
  955.                                       - 13 -
  956.  
  957.  
  958.                                 RESTORE COMMANDS
  959.                                 ----------------
  960.  
  961.  
  962.           The  Restore Menu consists of commands used to restore files to  a
  963.           hard disk from backups made with the Point & Shoot  Backup/Restore
  964.           BACKUP command.
  965.  
  966.  
  967.           RESTORE
  968.  
  969.           The  RESTORE command starts the restore process according  to  the
  970.           Point & Shoot Restoration Options.   Some of the files on a backup
  971.           disk could be copied to a hard disk with a standard copy  command,
  972.           but files that cross disk boundaries, files that have been renamed
  973.           during  the backup process,  and files that have  been  compressed
  974.           require  the  use  of  Point &  Shoot  Backup/Restore  for  proper
  975.           restoration.   In  general,  it  is best  to  use  Point  &  Shoot
  976.           Backup/Restore for all restoration activity.
  977.  
  978.           The  Restoration  Options should be checked  for  accuracy  before
  979.           starting the restoration (see UPDATE).  The restore process begins
  980.           by prompting for the first backup disk.  Disks must be restored in
  981.           the  same  order that they were backed up.   If  an  error  occurs
  982.           during  the  restoration  process,  the program  will  attempt  to
  983.           recover from the error and continue with restoration.
  984.  
  985.           Restoration  may be cancelled when a prompt appears for  the  next
  986.           disk  by  pressing [Esc],  but this action may result  in  partial
  987.           files restored to the hard disk if a file crosses a disk boundary.
  988.  
  989.           If  restoring  to  a  new subdirectory  (see  UPDATE),  a  graphic
  990.           directory  tree  will  appear for path  selection  each  time  the
  991.           original path changes on the backup disks.   The commands used  to
  992.           select  a  new   path are the same as  with  the  BACKUP  command. 
  993.           Target  subdirectories  may  be  created  during  the  restoration
  994.           process  when  the  directory  tree  appears.   To  create  a  new
  995.           directory,  hilight the directory which will be the parent of  the
  996.           new directory, then press "M" for make.  A prompt will ask for the
  997.           new  directory  name.   Any valid DOS filename may be used  for  a
  998.           subdirectory.   After  you enter the new directory name,  the  new
  999.           directory will appear on the tree.
  1000.  
  1001.           If the restoration requires more than one disk,  the program  will
  1002.           prompt for additional disks.  During the restoration process,  the
  1003.           status  is  displayed  at the bottom of the  screen.   The  status
  1004.           display includes the following information:
  1005.  
  1006.                Current Disk: The current disk being restored
  1007.  
  1008.                File Name:    The original path and file currently in 
  1009.                              restoration
  1010.  
  1011.                Copy To:      The path and file to restore to
  1012.  
  1013.  
  1014.                                       - 14 -
  1015.  
  1016.  
  1017.  
  1018.                File Size:    The size (in bytes) of the file being restored
  1019.  
  1020.                Total Bytes:  Total number of bytes restored from all disks
  1021.  
  1022.                Files:        Total number of files restored from all disks
  1023.  
  1024.                Disk Space:   Number of bytes left on the target disk
  1025.  
  1026.  
  1027.           Point & Shoot Backup/Restore maintains a record of how many  disks
  1028.           were  used  for the backup and will automatically stop  after  the
  1029.           last  disk has been restored.  Point & Shoot  Backup/Restore  also
  1030.           tracks of the appropriate disk number during restoration and  will
  1031.           issue an error message if an incorrect disk is inserted.
  1032.  
  1033.           If  the  RESTORE SELECTIVELY option is enabled (see  UPDATE),  you
  1034.           will  be  prompted to insert the LAST backup disk  in  the  floppy
  1035.           drive.   The  program uses this disk to maintain an index  of  all
  1036.           files backed up.   After the program reads the index file,  a file
  1037.           list and directory tree will appear on the screen to allow you  to
  1038.           select specific files for restoration.
  1039.  
  1040.           The [left arrow] and [right arrow] move between the file list  and
  1041.           the directory tree.   A "*" will appear next to any files selected
  1042.           for  restoration and also next to any directories that contain  at
  1043.           least  one file marked for restoration.   All the files backed  up
  1044.           will  appear  in  the  file  list,  sorted  by  name  within  each
  1045.           subdirectory group.  Use the [up arrow], [down arrow],  [Home] and
  1046.           [End]  keys to move around the file list and directory  tree.   As
  1047.           you move through the file list, the subdirectory that contains the
  1048.           currently hilighted file will be hilighted.
  1049.  
  1050.           When  you  are  in  the file list,  the  [Enter]  key  selects  or
  1051.           deselects the currently hilighted file for restoration.   The  [+]
  1052.           and [-] keys select and deselect all files.   The [Ctrl-PgDn]  key
  1053.           selects the current file and moves the cursor to the next file.
  1054.  
  1055.           When  you are in the directory tree,  the [Enter] key  selects  or
  1056.           deselects all files in the current directory for restoration.  The
  1057.           file list will scroll to show files in the selected directory when
  1058.           [Enter]  is  used.   The [+] and [-] keys select or  deselect  all
  1059.           files for restoration.
  1060.  
  1061.           After you have selected the files you wish to restore,  the  [F10]
  1062.           key  will  continue  with the restoration process.   You  will  be
  1063.           prompted  for the appropriate disks to insert as  the  restoration
  1064.           proceeds.
  1065.  
  1066.  
  1067.  
  1068.  
  1069.  
  1070.  
  1071.  
  1072.  
  1073.                                       - 15 -
  1074.  
  1075.  
  1076.  
  1077.           UPDATE
  1078.  
  1079.           Update modifies the data fields in the Restoration Options screen. 
  1080.           Data entry is accomplished according to the commands described  in
  1081.           the GENERAL OVERVIEW section of this documentation.  The [F10] key
  1082.           saves  all the Restoration Options, and [Esc] will cancel  changes
  1083.           made.
  1084.  
  1085.           Following is a description of the data fields found on the
  1086.           restoration options screen:
  1087.  
  1088.                RESTORE SOURCE DRIVE:  The floppy disk drive to be used for 
  1089.                     the restoration.
  1090.  
  1091.                RESTORE TO ORIG. PATH?:  Option to restore backup files to 
  1092.                     the directory from which they came, otherwise the 
  1093.                     program will prompt for a target directory with a 
  1094.                     graphic directory tree.
  1095.  
  1096.                PROMPT ON DUPLICATES?:  Option to force prompting if the 
  1097.                     restoration encounters a duplicate file name
  1098.  
  1099.                PROMPT ON MOD FILES:  Option to force prompting if the
  1100.                     restoration encounters a file that has been modified 
  1101.                     since the last backup
  1102.  
  1103.                RESTORE SELECTIVELY?:  Option to bring a file list and
  1104.                     directory tree to the screen to allow selection of
  1105.                     specific files for restoration.
  1106.  
  1107.  
  1108.  
  1109.  
  1110.  
  1111.  
  1112.  
  1113.  
  1114.  
  1115.  
  1116.  
  1117.  
  1118.  
  1119.  
  1120.  
  1121.  
  1122.  
  1123.  
  1124.  
  1125.  
  1126.  
  1127.  
  1128.  
  1129.  
  1130.  
  1131.  
  1132.                                       - 16 -
  1133.  
  1134.  
  1135.                                       SETUP
  1136.                                       -----
  1137.  
  1138.  
  1139.           The SETUP command is used to establish the configuration for Point
  1140.           & Shoot Backup/Restore.   In SETUP, you can select program  colors
  1141.           and other defaults.  Available fields for SETUP include:
  1142.  
  1143.  
  1144.                COLORS:        If your computer has a color monitor, you will
  1145.                               be allowed to edit the program colors.  Only
  1146.                               some of the colors can be set including the
  1147.                               background, low text, normal text, headline,
  1148.                               and help line.  A sample screen is shown to
  1149.                               assist in color selection.  Use the up and
  1150.                               down arrow keys to select a color to modify,
  1151.                               then use the left and right arrow keys to
  1152.                               choose a color.  The new colors will take
  1153.                               affect when you quit SETUP.
  1154.  
  1155.                BEEPER ON?:    If "Y", the computer's beeper will sound
  1156.                               on errors and other places within the
  1157.                               program.  Set this to "N" if the beep is
  1158.                               not desired.
  1159.  
  1160.                HOURLY CHIME?: If "Y", the computer's beeper will sound
  1161.                               when the time reaches the hour mark.
  1162.  
  1163.                DISK DRIVE USAGE:  Determines the disk drives used on your
  1164.                               system for directory tree scanning.  Set each
  1165.                               drive letter that your computer supports to
  1166.                               "Y".  If you do not set the correct drive
  1167.                               letters, the directory tree used in many
  1168.                               places in the program will not show all of
  1169.                               your disk drives.
  1170.  
  1171.                FLOPPY DISK #: Floppy disk drives on MS-DOS computers have
  1172.                               a number from 0 to 3 associated with them.
  1173.                               Standard numbering is 0=A and 1=B.  This is
  1174.                               the default for the program.  Some systems
  1175.                               have additional floppy disk drives that may
  1176.                               have other letters such as F or G.  If your
  1177.                               system has a non-standard configuration of
  1178.                               floppy disks, you may have to designate the
  1179.                               correct floppy disk number for your drives
  1180.                               by entering the appropriate drive letter next
  1181.                               to the number for your drive.  These fields
  1182.                               must be correctly set for the built-in format
  1183.                               feature to operate correctly.
  1184.  
  1185.  
  1186.  
  1187.  
  1188.  
  1189.  
  1190.  
  1191.                                       - 17 -
  1192.  
  1193.  
  1194.                              EXAMPLES & BACKUP STRATEGY
  1195.                              --------------------------
  1196.  
  1197.  
  1198.           Proper  backups  of  your valuable hard disk  data  are  extremely
  1199.           important.   Hard disks seem to fail at the worst  possible  time.
  1200.           Reconstruction  of data is often difficult and expensive,  and  is
  1201.           sometimes  impossible.   The Point & Shoot Backup/Restore  program
  1202.           will provide safety for your data, but only if you perform backups
  1203.           on a regular basis.   Different users will choose different backup
  1204.           strategies.    Following   are  some  suggestions  to   use   when
  1205.           formulating your backup strategy.
  1206.  
  1207.           Always use a rotating set of backup disks.   Alternate the set for
  1208.           each backup.  If anything happens to one set, you will always have
  1209.           another  (albeit  slightly older) set of backup disks.   A  common
  1210.           scheme is to mark one set for Monday,  Wednesday,  and Friday  and
  1211.           the other set for Tuesday, Thursday,  and Saturday.   Occasionally
  1212.           (perhaps  weekly or monthly) perform a complete hard  disk  backup
  1213.           using  another set of disks and store them in a safe  place  (your
  1214.           bank or a fireproof safe).
  1215.  
  1216.           Always use high quality diskettes when performing a backup.   Your
  1217.           data is worth the higher price of a few disks.
  1218.  
  1219.  
  1220.           Example 1:  Backup of entire hard disk.
  1221.  
  1222.                       MODIFIED FILES ONLY:  N
  1223.                       BACKUP SOURCE PATH:   C:\
  1224.                       FILE SEARCH:          *.*
  1225.                       INCLUDE TRAILS:       Y
  1226.  
  1227.  
  1228.           Example 2:  Full backup followed by incremental backups.
  1229.  
  1230.                       Use example #1 for first backup.  After that
  1231.                       set the MODIFIED FILES ONLY option to "Y" and
  1232.                       perform your backups.  ALWAYS USE NEW DISKS
  1233.                       when MODIFIED FILES ONLY is set to "Y" because
  1234.                       some of your files will only be backed up on
  1235.                       prior backup disks.  If you must restore your
  1236.                       disks, start at the very first disk and restore
  1237.                       them in order.  Newer files will eventually
  1238.                       replace older ones.  If the number of backup
  1239.                       disks gets too large, start over with a complete
  1240.                       backup as shown in Example #1.
  1241.  
  1242.  
  1243.           Example 3:  Selected file backup.
  1244.  
  1245.                       Set the BACKUP SOURCE PATH and FILE SEARCH fields
  1246.                       to restrict the backup to files you wish to back up.
  1247.  
  1248.  
  1249.  
  1250.                                       - 18 -
  1251.  
  1252.  
  1253.                                REGISTRATION FORM
  1254.                                -----------------
  1255.  
  1256.  
  1257.           PROGRAM:  Point & Shoot Backup/Restore     VERSION: 2.0
  1258.  
  1259.           SERIAL #:  ___________________________ (see program main screen)
  1260.  
  1261.                     Applied Micro Systems Technology (AMST)
  1262.                     P.O. Box 1596, Welch Ave.
  1263.                     Ames, Iowa  50010
  1264.  
  1265.           Name      __________________________________________________
  1266.  
  1267.           Company   __________________________________________________
  1268.  
  1269.           Address   __________________________________________________
  1270.  
  1271.                     __________________________________________________
  1272.  
  1273.                     __________________________________________________
  1274.  
  1275.           Phone     (    ) _______________________
  1276.  
  1277.  
  1278.           Write for information on volume discounts and site licenses.
  1279.  
  1280.  
  1281.           Payment   $_______   $35 for full registration, printed 
  1282.                                    documentation and user support.
  1283.                                    (no cash please).
  1284.  
  1285.           Payment Method:      ____Check    ____VISA    ____MC
  1286.  
  1287.           Credit Card #:  _________________________  Exp. Date _______
  1288.  
  1289.           Name on Card:   ____________________________________________
  1290.  
  1291.           Auth Signature: ____________________________________________
  1292.  
  1293.  
  1294.           Where did you hear about this program?  ____________________
  1295.  
  1296.  
  1297.           Comments  __________________________________________________
  1298.  
  1299.                     __________________________________________________
  1300.  
  1301.                     __________________________________________________
  1302.  
  1303.                     __________________________________________________
  1304.  
  1305.                     __________________________________________________
  1306.  
  1307.                     __________________________________________________
  1308.  
  1309.                                      - 19 -
  1310.